Author Topic: Error hooking API upon Installation (Read 51003 times)

Boggin · « **Reply #50 on:** January 26, 2017, 11:51:39 am »

My mistake on that - when you position the cursor on the cmd window, use the left click and drag.

Anatoli Lioultchenko · « **Reply #51 on:** January 26, 2017, 12:01:02 pm »

No save as.There are:select,copy etc. but no save as.

Boggin · « **Reply #52 on:** January 26, 2017, 12:15:22 pm »

What do you get when you select Save - does it give the option give it a name ?

Anatoli Lioultchenko · « **Reply #53 on:** January 26, 2017, 12:22:10 pm »

I did not select "save as" since there is no such option.Left click-nothing, right-select,copy,select all,find etc.and no menu with "save as"

Boggin · « **Reply #54 on:** January 26, 2017, 12:25:19 pm »

Can you re-read my Reply #48 - after the pic appears in the Snipping Tool window, are you clicking on File in its menu ?

Anatoli Lioultchenko · « **Reply #55 on:** January 26, 2017, 12:40:52 pm »

I did everything according to your instractions.I drug the text on the middle of the screen, click on it and found no save as.This should be a big menu.But appeared small one without "save as".

Boggin · « **Reply #56 on:** January 26, 2017, 12:45:43 pm »

Try pressing CTRL+s together to see if that gives you the Save As window.

Anatoli Lioultchenko · « **Reply #57 on:** January 26, 2017, 12:54:29 pm »

Gives nothing.

Adz · « **Reply #58 on:** January 26, 2017, 12:54:39 pm »

I also have HitmanPro, i will try to install windows repair through safe boot. will report back

Boggin · « **Reply #59 on:** January 26, 2017, 12:57:05 pm »

Quote from: Adzkii on January 26, 2017, 12:54:39 pm

I also have HitmanPro, i will try to install windows repair through safe boot. will report back

I don't know what you are talking about.

Would you please not post in this thread.

Anatoli Lioultchenko · « **Reply #60 on:** January 26, 2017, 12:59:52 pm »

That was another participant.

Adz · « **Reply #61 on:** January 26, 2017, 01:00:06 pm »

are you feeling alright? I'm having the same issue with installing Windows repair tool. I was reading through the thread to see what the solution is, it might be that hitmanpro is interrupting the installation.

Boggin · « **Reply #62 on:** January 26, 2017, 01:03:35 pm »

Quote from: Anatoli Lioultchenko on January 26, 2017, 12:54:29 pm

Gives nothing.

Let's see if we are on the same page - this is what I get after the snip appears in the Snipping Tool frame -

Anatoli Lioultchenko · « **Reply #63 on:** January 26, 2017, 01:06:26 pm »

you are Lucky, I am not.

Boggin · « **Reply #64 on:** January 26, 2017, 01:07:13 pm »

Quote from: Adzkii on January 26, 2017, 01:00:06 pm

are you feeling alright? I'm having the same issue with installing Windows repair tool. I was reading through the thread to see what the solution is, it might be that hitmanpro is interrupting the installation.

Possibly, but Anatoli has other problems which you will have seen if you have read all of the thread and which I'm working on and prefer no distractions at this time.

Boggin · « **Reply #65 on:** January 26, 2017, 01:09:09 pm »

@ Anatoli - how does my pic compare with what you are seeing in the Snipping Tool ?

Anatoli Lioultchenko · « **Reply #66 on:** January 26, 2017, 01:12:31 pm »

I have not seen my pik,sinse had not saved.

Boggin · « **Reply #67 on:** January 26, 2017, 01:29:33 pm »

Let's try Paint then.

With your cmd window up and chkdsk /f entered, when using a laptop to use the PRTSC (printscreen) you may need to press the FN key together with the ALT and the PRTSC keys

I normally hit them twice and then go Start - type paint and press enter.

When that opens you will see a Paste icon - click on that which should put the image into the window, then click on File and hover over Save as

Click on PNG in the right pane which should open the window for you to give it a name and then follow the steps to attach that, but the way things are going I think the best option for you would be to perform a repair install.

This doesn't affect your personal stuff or installed programs, unlike the Reset option in Recovery, which while leaving your personal stuff intact, will remove any installed programs.

Instructions on that to follow if necessary.

Anatoli Lioultchenko · « **Reply #68 on:** January 26, 2017, 01:49:58 pm »

Dear Boggin! Let`s give up all these exercices.I prise your effort in assisting and thenkful for keep you busy with me.The cause of the problem has been found.That`s Hitman Pro tool, which is blocking Tweaking.com Tool.I requested Hitman tech experts to look into the matter and they confirmed that they are working on the issue and possible solution may be via updating their Tool.The problem is inside Hitman Pro and related to criptage. You and me will kill plenty of time without results.Merci.

Boggin · « **Reply #69 on:** January 26, 2017, 02:01:31 pm »

I don't think it's Hitman Pro that is stopping you from running a chkdsk /f or the missing Save as or the empty Journal message in HDSentinel.

One way to confirm that would be to use the Hitman Pro Uninstaller (providing you have a copy of the product key) and then see if you can perform a chkdsk /f with it uninstalled.

Sometimes repair attempts can take a while when alternatives have to be used, but I'll leave it with you for now - but come back if you want to continue.

As a time difference comparison, it's 10:00pm here in the UK, so depending upon when you post, you may have a few hours to wait for my reply.

Anatoli Lioultchenko · « **Reply #70 on:** February 02, 2017, 05:20:12 am »

Yes,this is HitmanPro,which created the error.Now the problem is SOLVED.The HitmanPro has placed a new update:< http://test.hitmanpro.com/hmpalert 3b 580.exe>.Both programmes e.g.Tweaking.com and HitmanPro are working in peaceful coexistance regime.Merci to all,participated in discussion.

Boggin · « **Reply #71 on:** February 02, 2017, 05:39:16 am »

Hitman Pro may well have conflicted WR - Norton Security kicked out the WR.exe on one of my laptops, but I don't think it would have been responsible for what I wrote in my last post.

Since Hitman Pro has been updated, do you still experience those ?

Anatoli Lioultchenko · « **Reply #72 on:** February 02, 2017, 07:06:35 am »

No problem.All work in normal way.

Boggin · « **Reply #73 on:** February 02, 2017, 08:53:50 am »

OK - It's just that I've never known an AV program to be able to block a command prompt execution or produce what could have pointed to a failing HDD in a program designed to report on its status.

Anatoli Lioultchenko · « **Reply #74 on:** February 02, 2017, 09:03:47 am »

It is another story.