Author Topic: hardware network monitoring (Read 12429 times)

bonbonboi · « **on:** July 15, 2014, 08:15:38 am »

I am looking for a good program for network monitoring for hardware devices like status cpu temperature etc. i am interested in server/client module, any help ?

Shane · « **Reply #1 on:** July 15, 2014, 10:13:20 am »

I know there are some out there but I havent used any so I dont know of any good ones.

I take it that you are looking for a program that allows you to monitor all these from one location and monitor multiple machines.

Also CPU temp all comes down to the motherboard and the cpu and if it is supported. But most newer cpus from the last few years all support it. Its just the older ones that some dont.

I had my old program CS Fire Monitor on my other site that had a remote function, but not sure how much it will do what you need, it is rather old now but still works.

As for other 3rd party ones I dont know of too many but I do know there are some.

Shane

bonbonboi · « **Reply #2 on:** July 16, 2014, 02:22:37 am »

Here is I found a simple tool called HWMonitor, has some basic network functionality, the idea of it that you set PC A on the listening mode then on PC B you connect to PC A by it's IP Address and on Port 25021 TCP. It's so simple and no central management or any alerts could be configured to be sent to the admin. I like the idea for now, but can not use it since I cannot find a way to let it start minimized to the tray, if there is anyone could figure out how to start the HWMonitor minimized to the tray on Windows start-up, let me know

bonbonboi · « **Reply #3 on:** July 16, 2014, 03:22:03 am »

Quote from: bonbonboi on July 16, 2014, 02:22:37 am

Here is I found a simple tool called HWMonitor, has some basic network functionality, the idea of it that you set PC A on the listening mode then on PC B you connect to PC A by it's IP Address and on Port 25021 TCP. It's so simple and no central management or any alerts could be configured to be sent to the admin. I like the idea for now, but can not use it since I cannot find a way to let it start minimized to the tray, if there is anyone could figure out how to start the HWMonitor minimized to the tray on Windows start-up, let me know

I have found a little utility called "HWMontray" at http://sfkilla.com/index.php?option=com_content&task=view&id=25

God bless the author of it

Shane · « **Reply #4 on:** July 16, 2014, 03:33:39 pm »

No bad, I will have to check those out when I have time

Shane

bonbonboi · « **Reply #5 on:** July 17, 2014, 11:38:57 am »

Quote from: Shane on July 16, 2014, 03:33:39 pm

No bad, I will have to check those out when I have time

Shane

There is "PRTG Network Monitor" but it's heavy on resources. I will keep you updated if I found a simple lightweight network hardware monitor with alerts