1
Tweaking.com Forums
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
General Computer Support / Re: You Tube videos don't run.
« on: August 12, 2017, 04:24:58 am »
Point taken Thanks 
3
General Computer Support / Re: You Tube videos don't run.
« on: August 12, 2017, 12:59:34 am »
I tried everything both of you suggested unfortunately with no positive result.
You Tube would not run in all instances plus my original glitches weren't resolved either.
Finally I did a system restore prior to installing Windows Repair and after updating Windows etc You Tube is OK.
I believe I am due a Windows clean install but having never done one before (since the beginning of Windows!) I will bide my time.
Thank you both
You Tube would not run in all instances plus my original glitches weren't resolved either.
Finally I did a system restore prior to installing Windows Repair and after updating Windows etc You Tube is OK.
I believe I am due a Windows clean install but having never done one before (since the beginning of Windows!) I will bide my time.
Thank you both
4
General Computer Support / Re: You Tube videos don't run.
« on: August 11, 2017, 04:24:49 am »
Boggin, sorry not ignoring I have to take things slowly and one at a time 
5
General Computer Support / Re: You Tube videos don't run.
« on: August 11, 2017, 04:20:21 am »
I tried again>>>>
Windows PowerShell
Copyright (C) 2016 Microsoft Corporation. All rights reserved.
PS C:\Users\Ted> Get-AppXPackage -AllUsers -Name Microsoft.MicrosoftEdge | Foreach {Add-AppxPackage -DisableDevelopmentM
ode -Register “$($_.InstallLocation)\AppXManifest.xml” -Verbose}
Get-AppXPackage : Access is denied.
Access is denied.
At line:1 char:1
+ Get-AppXPackage -AllUsers -Name Microsoft.MicrosoftEdge | Foreach {Ad ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: ( [Get-AppxPackage], UnauthorizedAccessException
+ FullyQualifiedErrorId : System.UnauthorizedAccessException,Microsoft.Windows.Appx.PackageManager.Commands.GetApp
xPackageCommand
PS C:\Users\Ted>
Windows PowerShell
Copyright (C) 2016 Microsoft Corporation. All rights reserved.
PS C:\Users\Ted> Get-AppXPackage -AllUsers -Name Microsoft.MicrosoftEdge | Foreach {Add-AppxPackage -DisableDevelopmentM
ode -Register “$($_.InstallLocation)\AppXManifest.xml” -Verbose}
Get-AppXPackage : Access is denied.
Access is denied.
At line:1 char:1
+ Get-AppXPackage -AllUsers -Name Microsoft.MicrosoftEdge | Foreach {Ad ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (
[Get-AppxPackage], UnauthorizedAccessException+ FullyQualifiedErrorId : System.UnauthorizedAccessException,Microsoft.Windows.Appx.PackageManager.Commands.GetApp
xPackageCommand
PS C:\Users\Ted>
6
General Computer Support / Re: You Tube videos don't run.
« on: August 11, 2017, 04:09:57 am »Copied from the Powershell screen:-
PS C:\Users\Ted> At line:1 char:1
The AT command has been deprecated. Please use schtasks.exe instead.
Invalid command.
The AT command schedules commands and programs to run on a computer at
a specified time and date. The Schedule service must be running to use
the AT command.
AT [\\computername] [ [id] [/DELETE] | /DELETE [/YES]]
AT [\\computername] time [/INTERACTIVE]
[ /EVERY:date[,...] | /NEXT:date[,...]] "command"
\\computername Specifies a remote computer. Commands are scheduled on the
local computer if this parameter is omitted.
id Is an identification number assigned to a scheduled
command.
/delete Cancels a scheduled command. If id is omitted, all the
scheduled commands on the computer are canceled.
/yes Used with cancel all jobs command when no further
confirmation is desired.
time Specifies the time when command is to run.
/interactive Allows the job to interact with the desktop of the user
who is logged on at the time the job runs.
/every:date[,...] Runs the command on each specified day(s) of the week or
month. If date is omitted, the current day of the month
is assumed.
/next:date[,...] Runs the specified command on the next occurrence of the
day (for example, next Thursday). If date is omitted, the
current day of the month is assumed.
"command" Is the Windows NT command, or batch program to be run.
PS C:\Users\Ted> + Get-AppXPackage -AllUsers -Name Microsoft.MicrosoftEdge | Foreach {Ad ...
>> + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> + CategoryInfo : NotSpecified: (
[Get-AppxPackage], UnauthorizedAccessException>> + FullyQualifiedErrorId : System.UnauthorizedAccessException,Microsoft.Windows.Appx.PackageManager.Commands.GetAp
p
>> xPackageCommand
7
General Computer Support / Re: You Tube videos don't run.
« on: August 11, 2017, 03:57:51 am »
I assume I open powershell and copy the line and then press enter as per a 'Command Prompt'?
8
General Computer Support / You Tube videos don't run.
« on: August 11, 2017, 02:59:50 am »
Windows 10/Edge.
Ran Version 4 of Windows repair and the no play problem appeared.
Restored the system and ran the latest 4.02 version with same results.
In the first case I used the 'Go to Safe Mode' button in the programme.
'Network' wasn't activated.
In the second case (F8 doesn't work now it seems) I used the method which gives an F4 or F5 option...F5 'With networking'.
In all cases the programme ran to it's conclusion (including the Y/N implications elsewhere) but reported 'TIPS can't be opened with the built in admin account'
I only have one account on the PC 'Local Admin Account'
In all cases the network was not activated.
Searched and tried various remedies but none worked!
Do hope that's understandable as it is fairly complicated.......No problems in IE 11
I used the repair in the first place to stop occasional crashes in Edge and an occasional mouse delayed click problem...two mice different USB outlets.
Ran Version 4 of Windows repair and the no play problem appeared.
Restored the system and ran the latest 4.02 version with same results.
In the first case I used the 'Go to Safe Mode' button in the programme.
'Network' wasn't activated.
In the second case (F8 doesn't work now it seems) I used the method which gives an F4 or F5 option...F5 'With networking'.
In all cases the programme ran to it's conclusion (including the Y/N implications elsewhere) but reported 'TIPS can't be opened with the built in admin account'
I only have one account on the PC 'Local Admin Account'
In all cases the network was not activated.
Searched and tried various remedies but none worked!
Do hope that's understandable as it is fairly complicated.......No problems in IE 11
I used the repair in the first place to stop occasional crashes in Edge and an occasional mouse delayed click problem...two mice different USB outlets.
9
General Computer Support / Re: Stuck on Repair version 4
« on: August 08, 2017, 01:49:12 pm »
Thanks I only downloaded this morning but will update before I use it again.
10
General Computer Support / Re: Stuck on Repair version 4
« on: August 08, 2017, 01:27:05 pm »
Thanks for your comment hope my moment of panic (5 hours) was useful
11
General Computer Support / Re: Stuck on Repair version 4
« on: August 08, 2017, 01:12:06 pm »
Just found this reply on another thread and it seems to be running now!
Whoops, I decided to minimize the Windows Repair Window and I found a Window underneath requesting permission to run the repair, I typed "Y" and the repair restarted, finished and is now working on repair 38 (the App Store).
Whoops, I decided to minimize the Windows Repair Window and I found a Window underneath requesting permission to run the repair, I typed "Y" and the repair restarted, finished and is now working on repair 38 (the App Store).
12
General Computer Support / Stuck on Repair version 4
« on: August 08, 2017, 12:52:15 pm »
Posted this on the MGeeks forum can anyone help:-
Have a couple of PC niggles that I thought it may help with.
Downloaded this morning and ran the 'Common problems' tab run time about 1 hour 15 mins
Didn't fix so this afternoon I selected 'All problems'
Total run time so far is 4 Hrs
It's been on 18 of 45 Repair Volume Shadow Copy Service for 2hrs 30mins.
The blue indicator bar hasn't moved in the last 2 hours or so.
Both runs in safe mode as suggested by the instructional video.
I guess it is 'stuck' ....the cursor still moves and the two indicators in the programme are still moving.
Will leave for another hour or two but if it doesn't progress how do I get out of it safely...Please?
It has now run for 5 hours with no further movement.
Have a couple of PC niggles that I thought it may help with.
Downloaded this morning and ran the 'Common problems' tab run time about 1 hour 15 mins
Didn't fix so this afternoon I selected 'All problems'
Total run time so far is 4 Hrs
It's been on 18 of 45 Repair Volume Shadow Copy Service for 2hrs 30mins.
The blue indicator bar hasn't moved in the last 2 hours or so.
Both runs in safe mode as suggested by the instructional video.
I guess it is 'stuck' ....the cursor still moves and the two indicators in the programme are still moving.
Will leave for another hour or two but if it doesn't progress how do I get out of it safely...Please?
It has now run for 5 hours with no further movement.
Pages: [1]