Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Marek

Pages: [1]
1
General Computer Support / iaStor0 error id 9
« on: May 29, 2016, 03:02:03 am »
Dear Sirs:
Regularly once a day my Windows 7 Event Viewer shows the following error: The device,\Device\Ide\iaStor0, did not respond within the timeout period. Error id9. Could you please help me how to solve this error. Maybe by means of Tweaking.com Windows Repair.
Marek 

2
Everything Else / Re: Windows Repair (All-in-One)-the latest version cannot be installed
« on: May 22, 2015, 12:48:20 pm »
Problem is solved. I disabled the AV's shields control for installation time of Windows Repair (All-in-One)
Marek

3
Everything Else / Re: Windows Repair (All-in-One)-the latest version cannot be installed
« on: May 21, 2015, 01:28:47 am »
Hi Shane:
I use the same anti-virus at the same settings in configuration with Windows 7 OS and installation of the latest version of Windows Repair finished successfully. :wink: :wink:  I would like to undersign that above error is being shown at the end of program installation and makes it impossible to open.
Marek   

4
Everything Else / Windows Repair (All-in-One)-the latest version cannot be installed
« on: May 20, 2015, 03:47:37 am »
The latest version (3.2.0) of Windows Repair cannot be installed. Refers to Windows XP only. Attached error.

5
Everything Else / Re: Step 5: Backup
« on: April 11, 2015, 09:48:09 am »
Hi Shane:
I unchecked the suitable boxes related to UpdatusUser\ntuser registry and now all is good but I am not convinced
it is a proper solution  :wink: Anyway, the problem maybe recognized as SOLVED.
Kind regards
Marek from Poland

6
Everything Else / Re: Step 5: Backup
« on: April 09, 2015, 10:06:24 am »
I have reinstall the program and now is good but not all. Taking the opportunity I would like to say that after each manual backup I receive the following message: "The last scheduled backup had errors or failed"        Please look at below log note:
[2015-04-09 - 12:37:28] Backing Up File: C:\Documents and Settings\UpdatusUser\ntuser.dat
[2015-04-09 - 12:37:28] Result: Failed - Error: -1 (API Reg Save Failed (), Tried File Copy, File In use, Cannot copy.)

[2015-04-09 - 12:37:28] Backing Up File: C:\Documents and Settings\UpdatusUser\Ustawienia lokalne\Dane aplikacji\Microsoft\Windows\UsrClass.dat
[2015-04-09 - 12:37:28] Result: Failed - Error: -1 (API Reg Save Failed (), Tried File Copy, File In use, Cannot copy.)
Marek

7
Everything Else / Step 5: Backup
« on: April 08, 2015, 12:11:46 pm »
Hello:
Refers to: Windows Repair (All-in-One)
Registry backup option does not run in Windows XP SP3
Marek

8
Everything Else / Re: WLAN-AutoConfig Warnings
« on: March 28, 2015, 04:51:36 am »
I have already done what you advice me, but no effects. The problem still exists. Before of that these warnings appear only when you go in Event Viewer to Windows Log and next to System logs. I do not see them when I go to Application and Services>Microsoft>Windows>WLAN Config>Operational.
Marek

9
Everything Else / WLAN-AutoConfig Warnings
« on: March 27, 2015, 01:59:34 am »
Hi Shane:
You as a unique man solved the problem with WMI error ID10. That is why I think you will fix the another one. It regards two warnings showing by Event Log in Windows 7 and so: WLAN-AutoConfig ID 10002 (WLAN Extensibility Module has stopped) and WLAN-AutoConfig ID 4001 (WLAN-AutoConfig Service has successfully stopped)  :smiley: Both warnings appear during computer shutting down. According to me they should be shown as information not warnings. I tried to exclude them from Event Log but they appear while next computer reboot. I see such warnings in many many laptops.
Marek     

10
Everything Else / Re: Windows Repair All-in-One Position on the Screen
« on: March 17, 2015, 02:49:16 am »
Ok Shane:
I have just installed your next program Technician Tools and what I noticed: All the subwindows I can move where I want and what is important they keep their positions on the screen when they are opened again. Whole program is fantastic like made by artist. I can look at it only.  :smiley: Please do the same impressions with Windows Repair.
Marek

11
Everything Else / Re: Windows Repair All-in-One Position on the Screen
« on: March 16, 2015, 12:00:05 pm »
Hi Shane:
You are right. Without task bar, program opens in the center of the screen. In such case another question: Is it possible to do the program so that its position previously set by user will be remembered?  :wink:
Marek 

12
Everything Else / Windows Repair All-in-One Position on the Screen
« on: March 16, 2015, 04:01:06 am »
Hello:
Your software is better and better. That is why at the moment I have cosmetic question only: Why very good looking program interface does not display on the central point of the screen but is little moved to the bottom? That is all for now. Thank you in advance for your reply.
Marek

13
General Computer Support / Re: Turn Windows features On or Off on Windows 7
« on: November 18, 2014, 05:19:41 am »
Yesterday I did the System Restore again to point 12-11-2014. It last about 2 hours. At last I obtained as follows:
1Turn Windows feature on or off - successful
2.Windows Update properly runs
3.WL Mail has all features Inbox therein
4.WL Messenger runs perfectly
5,Task Scheduler still unavailable
What happened today morning?
WL Mail has not inbox again, WL Messenger cannot signs in due to unavailable server
What was strange issues?
Before system restore hard disk had 390 GB free space after system restore exactly today 480 GB free space. :wink:
Due to p,1 is successful this topic post can be recognized as solved but the rest problems I will represent in the separate sectors uf our forum.
Best regards
Marek

14
General Computer Support / Re: Turn Windows features On or Off on Windows 7
« on: November 17, 2014, 05:33:13 am »
I still cannot access the given links (from Microsoft only) They probably do not like me  :smiley:What I have done? I have downloaded on the other computer and was installing to this one. NET Framework Repair Tool installation crashed with information "Windows Installer failed" since System Update Readiness Tool was installing above 1 hour and at last successfully. I do not know why it took about 25 GB on disk Moreover I have done all your suggestions and still the same. Maybe something wrong with Windows Installer?
Marek   

15
General Computer Support / Re: Turn Windows features On or Off on Windows 7
« on: November 16, 2014, 10:44:25 am »
Hi Boggin:
Here are detauls from Event Log
Log Name:      System
Source:        Microsoft-Windows-WindowsUpdateClient
Date:          11/15/2014 5:16:31 PM
Event ID:      20
Task Category: Windows Update Agent
Level:         Error
Keywords:      Failure,Installation
User:          SYSTEM

Description:
Installation Failure: Windows failed to install the following update with error 0x80070002: Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 7, Vista, Server 2008, Server 2008 R2 x64 (KB2978128).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-WindowsUpdateClient" Guid="{945A8954-C147-4ACD-923F-40C45405A658}" />
    <EventID>20</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>1</Task>
    <Opcode>13</Opcode>
    <Keywords>0x8000000000000028</Keywords>
    <TimeCreated SystemTime="2014-11-15T16:16:31.961006500Z" />
    <EventRecordID>1686480</EventRecordID>
    <Correlation />
    <Execution ProcessID="900" ThreadID="3452" />
    <Channel>System</Channel>
    </System>
  <EventData>
    <Data Name="errorCode">0x80070002</Data>
    <Data Name="updateTitle">Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 7, Vista, Server 2008, Server 2008 R2 x64 (KB2978128)</Data>
    <Data Name="updateGuid">{E257D135-40B9-4361-9E7D-8537D256D54B}</Data>
    <Data Name="updateRevisionNumber">202</Data>
  </EventData>
</Event>

Moreover I tried your suggestio:
1.NET Framework Repair Tool - webpage unavailable
2 NET Framewwork Installation - crashed
Thank you for now
Marek
   
 

16
General Computer Support / Turn Windows features On or Off on Windows 7
« on: November 16, 2014, 01:57:15 am »
Hello:
What happened after last Windows Updates? One important update called Security for Microsoft NET Framework 4.5 and 4.5.1 Server 2008 R2 cannot be installed. After that what I noticed in my computer?
1Turn Windows feature On or Off does not work (blank window)
2..Googke Chrome browser cannot be upgated
3.No Inbox in Windows Live Mail
4.Task Scheduler error: Selected item (0)
no longer exists
Probably othwrs which I have not observed so far.
Maybe you have solution for it then please help me. Thank you in advance
I would like to mention that neither System Restore and your magic program did not fix this problem.
Marek

17
General Computer Support / Re: Windows 7 - Kernel Processor Power Warning ID 37 Task Category 7
« on: October 23, 2014, 03:55:41 am »
Hi Shane
I attach the screenshot regarding the problem. I have done all what Boggin suggested and no effects. Problem still exists. I do not know how to access BIOS in Acer notebook.
Marek

18
General Computer Support / Windows 7 - Kernel Processor Power Warning ID 37 Task Category 7
« on: October 22, 2014, 01:16:09 am »
Hello:
At first Many thanks you solved the problem with  WMI error ID 10. I was waiting for it above 2 years. Nobody helpped so far. That is why I believe you can also fix the warning as to Kernel Processor Power ID 37 Task Category 7
Marek

Pages: [1]