Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Oceanblue23

Pages: [1] 2
1
General Computer Support / Re: MDAC Not Found in Windows 7
« on: March 27, 2013, 07:35:42 am »
i want to backup my whole hard drive which is the best method of doing this...

2
General Computer Support / Re: MDAC Not Found in Windows 7
« on: March 21, 2013, 06:13:05 am »
okay i reran the checkdisk i let it go overnight i just dnt know if it found any errors or bad sectors. okay what should we try now?
i also wonder if there is the newest version of windows 7 with any new updates to install the latest version of windows 7 with sp1
that is the newest. i also have tried to make sure all of my drivers are compatible but not sure which software would be the best
to do this with. i want to see if there is anything that is incompatible with this computer. i tried twice yesterday to update and both
failed. i am prepared to do this alot... gives me lots of practice with windows 7 to learn it.... :wink:

3
General Computer Support / Re: MDAC Not Found in Windows 7
« on: March 20, 2013, 11:24:14 am »
okay i tried updating this, this morning. i ran the upgrade and it came back at the last step as could not continue upgrade due to a corrupt file in the installation disk. so i ran a checkdisk and it repaired some files in the index and security files. i then burned another copy of Windows 7 from the iso i downloaded which i have a legal key and downloaded it from sevenforums i do believe. now i shall try this again unless we should try something else.

4
General Computer Support / Re: MDAC Not Found in Windows 7
« on: March 19, 2013, 11:03:55 am »
okay i updated the bios it said there was an update that was available.

5
General Computer Support / Re: MDAC Not Found in Windows 7
« on: March 19, 2013, 10:34:31 am »
i did a check disk and that turned up nothing. awhile back it said it needed to do a bios update and i thought it did one but
im not sure if i did it or not.

6
General Computer Support / Re: MDAC Not Found in Windows 7
« on: March 19, 2013, 08:12:14 am »
also when i talked to Microsoft they told me this was an SQL problem.
they wanted to charge me a 100.00 to consult with them but i have
no $$$ and no job which stinks. i thank you so very much for helping me.

7
General Computer Support / Re: MDAC Not Found in Windows 7
« on: March 19, 2013, 07:25:24 am »
ok i did a memory test and it found nothing. i am going to run a chk disk once again to see if this
brings up anything

8
General Computer Support / Re: MDAC Not Found in Windows 7
« on: March 18, 2013, 09:08:58 pm »
I think i did a chkdsk but im not sure about a memory test

9
General Computer Support / Re: MDAC Not Found in Windows 7
« on: March 18, 2013, 08:38:24 pm »
Lets see how this works :smiley:

10
General Computer Support / Re: MDAC Not Found in Windows 7
« on: March 18, 2013, 07:50:54 pm »
Well it happened again.... Only this time i took a picture with my
Iphone so you could read the message. How can i post
This error message

11
General Computer Support / Re: MDAC Not Found in Windows 7
« on: March 17, 2013, 05:58:19 am »
okay i can do this. let me make sure everything is in order and make sure i have all the updates in windows. i got the update to work
via Autopatcher. so thats one good thing. I am going to try the windows repair without uninstalling every driver except network to see if
the update helped. if it didnt i will then uninstall every driver except the network driver and see what happens.

12
General Computer Support / Re: MDAC Not Found in Windows 7
« on: March 16, 2013, 07:12:38 am »
it says it is! it says automatically managed. allocated like 7650 mb for pagefile sys.

13
General Computer Support / Re: MDAC Not Found in Windows 7
« on: March 15, 2013, 07:36:48 am »
LOL no my windows is set to c:/ but this is the log from C:\$WINDOWS.~BT\Sources\Rollback
and the log file was named setuperr.log

14
General Computer Support / Re: MDAC Not Found in Windows 7
« on: March 13, 2013, 08:38:22 am »
2013-03-11 20:39:03, Error      [0x06424b] IBSLIB FirstBootCheckpoint: Failed to recover crash dump from pagefile.sys
2013-03-11 20:54:01, Error      [0x080654] MIG    Path not found for move target \\?\X:\ProgramData\Microsoft\Network\Downloader\qmgr0.dat; attempting to create it[gle=0x00000003]
2013-03-11 20:54:01, Error      [0x080656] MIG    Failed to restore file \\?\X:\$INPLACE.~TR\Machine\DATA\ProgramData\Microsoft\Network\Downloader\qmgr0.dat to \\?\X:\ProgramData\Microsoft\Network\Downloader\qmgr0.dat[gle=0x00000003]
2013-03-11 20:54:01, Error      [0x080654] MIG    Path not found for move target \\?\X:\ProgramData\Microsoft\Network\Downloader\qmgr1.dat; attempting to create it[gle=0x00000003]
2013-03-11 20:54:01, Error      [0x080656] MIG    Failed to restore file \\?\X:\$INPLACE.~TR\Machine\DATA\ProgramData\Microsoft\Network\Downloader\qmgr1.dat to \\?\X:\ProgramData\Microsoft\Network\Downloader\qmgr1.dat[gle=0x00000003]
2013-03-11 20:59:05, Error      [0x080654] MIG    Path not found for move target \\?\X:\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A962D\00000000_Hardware; attempting to create it[gle=0x00000003]
2013-03-11 20:59:05, Error      [0x080656] MIG    Failed to restore file \\?\X:\$INPLACE.~TR\Machine\DATA\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A962D\00000000_Hardware to \\?\X:\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A962D\00000000_Hardware[gle=0x00000003]
2013-03-11 20:59:05, Error      [0x080654] MIG    Path not found for move target \\?\X:\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A962D\00000001_Hardware; attempting to create it[gle=0x00000003]
2013-03-11 20:59:05, Error      [0x080656] MIG    Failed to restore file \\?\X:\$INPLACE.~TR\Machine\DATA\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A962D\00000001_Hardware to \\?\X:\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A962D\00000001_Hardware[gle=0x00000003]
2013-03-11 20:59:05, Error      [0x080654] MIG    Path not found for move target \\?\X:\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A962D\00000002_Hardware; attempting to create it[gle=0x00000003]
2013-03-11 20:59:05, Error      [0x080656] MIG    Failed to restore file \\?\X:\$INPLACE.~TR\Machine\DATA\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A962D\00000002_Hardware to \\?\X:\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A962D\00000002_Hardware[gle=0x00000003]
2013-03-11 20:59:05, Error      [0x080654] MIG    Path not found for move target \\?\X:\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A962D\00000003_Hardware; attempting to create it[gle=0x00000003]
2013-03-11 20:59:05, Error      [0x080656] MIG    Failed to restore file \\?\X:\$INPLACE.~TR\Machine\DATA\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A962D\00000003_Hardware to \\?\X:\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A962D\00000003_Hardware[gle=0x00000003]
2013-03-11 20:59:05, Error      [0x080654] MIG    Path not found for move target \\?\X:\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A962D\StorMigDB; attempting to create it[gle=0x00000003]
2013-03-11 20:59:05, Error      [0x080656] MIG    Failed to restore file \\?\X:\$INPLACE.~TR\Machine\DATA\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A962D\StorMigDB to \\?\X:\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A962D\StorMigDB[gle=0x00000003]
2013-03-11 20:59:05, Error      [0x080654] MIG    Path not found for move target \\?\X:\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A962D\StorMigSettings; attempting to create it[gle=0x00000003]
2013-03-11 20:59:05, Error      [0x080656] MIG    Failed to restore file \\?\X:\$INPLACE.~TR\Machine\DATA\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A962D\StorMigSettings to \\?\X:\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A962D\StorMigSettings[gle=0x00000003]
2013-03-11 20:59:05, Error      [0x080654] MIG    Path not found for move target \\?\X:\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A9CF5\applicationHost.config; attempting to create it[gle=0x00000003]
2013-03-11 20:59:05, Error      [0x080656] MIG    Failed to restore file \\?\X:\$INPLACE.~TR\Machine\DATA\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A9CF5\applicationHost.config to \\?\X:\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A9CF5\applicationHost.config[gle=0x00000003]
2013-03-11 20:59:05, Error      [0x080654] MIG    Path not found for move target \\?\X:\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A9CF5\iis7_gather.log; attempting to create it[gle=0x00000003]
2013-03-11 20:59:05, Error      [0x080656] MIG    Failed to restore file \\?\X:\$INPLACE.~TR\Machine\DATA\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A9CF5\iis7_gather.log to \\?\X:\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A9CF5\iis7_gather.log[gle=0x00000003]
2013-03-11 20:59:05, Error      [0x080654] MIG    Path not found for move target \\?\X:\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A9CF5\iis_upgrade_data.xml; attempting to create it[gle=0x00000003]
2013-03-11 20:59:05, Error      [0x080656] MIG    Failed to restore file \\?\X:\$INPLACE.~TR\Machine\DATA\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A9CF5\iis_upgrade_data.xml to \\?\X:\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A9CF5\iis_upgrade_data.xml[gle=0x00000003]
2013-03-11 20:59:05, Error      [0x080654] MIG    Path not found for move target \\?\X:\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A9CF5\redirection.config; attempting to create it[gle=0x00000003]
2013-03-11 20:59:05, Error      [0x080656] MIG    Failed to restore file \\?\X:\$INPLACE.~TR\Machine\DATA\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A9CF5\redirection.config to \\?\X:\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005A9CF5\redirection.config[gle=0x00000003]
2013-03-11 20:59:05, Error      [0x080654] MIG    Path not found for move target \\?\X:\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005AEAD9\MSDTC.LOG; attempting to create it[gle=0x00000003]
2013-03-11 20:59:05, Error      [0x080656] MIG    Failed to restore file \\?\X:\$INPLACE.~TR\Machine\DATA\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005AEAD9\MSDTC.LOG to \\?\X:\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005AEAD9\MSDTC.LOG[gle=0x00000003]
2013-03-11 20:59:05, Error      [0x080654] MIG    Path not found for move target \\?\X:\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005AF6C7\DEFAULT.FIL; attempting to create it[gle=0x00000003]
2013-03-11 20:59:05, Error      [0x080656] MIG    Failed to restore file \\?\X:\$INPLACE.~TR\Machine\DATA\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005AF6C7\DEFAULT.FIL to \\?\X:\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005AF6C7\DEFAULT.FIL[gle=0x00000003]
2013-03-11 20:59:05, Error      [0x080654] MIG    Path not found for move target \\?\X:\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005AF6C7\NTUSER.FIL; attempting to create it[gle=0x00000003]
2013-03-11 20:59:05, Error      [0x080656] MIG    Failed to restore file \\?\X:\$INPLACE.~TR\Machine\DATA\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005AF6C7\NTUSER.FIL to \\?\X:\$UPGRADE.~OS\OnlineUpgradeGatherWork\agentmgr\CCSIAgent\005AF6C7\NTUSER.FIL[gle=0x00000003]
2013-03-11 20:59:51, Error      [0x080656] MIG    Failed to restore file \\?\X:\$INPLACE.~TR\Data\DATA\Windows\System32\Tasks\WebReg  to \\?\X:\Windows\System32\Tasks\WebReg [gle=0x00000002]

15
General Computer Support / Re: MDAC Not Found in Windows 7
« on: March 13, 2013, 08:34:09 am »
do you want me to send you the log files?

16
General Computer Support / Re: MDAC Not Found in Windows 7
« on: March 12, 2013, 06:55:48 pm »
okay i guess now where do we go from here?

17
General Computer Support / Re: MDAC Not Found in Windows 7
« on: March 12, 2013, 11:57:37 am »
Crash Dump Analysis
--------------------------------------------------------------------------------

Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.

No valid crash dumps have been found on your computer

18
General Computer Support / Re: MDAC Not Found in Windows 7
« on: March 12, 2013, 11:53:52 am »
i installed the program fro crashes but not real sure how to use it.
also could this be virus or malware or trojan related?

19
General Computer Support / Re: MDAC Not Found in Windows 7
« on: March 11, 2013, 06:08:30 pm »
well i tried repairing windows and went down stairs for a couple mins and when i got back it
just said that the repair couldnt continue and that my previous version was reinstated.
I m really starting to not like windows 7 with how difficult this has been.

20
General Computer Support / Re: MDAC Not Found in Windows 7
« on: March 11, 2013, 12:56:35 pm »
Okay Thank you so much. I am going to try a Windows Repair and will let you know what kind of animal we are dealing with.
Thank you again so much for your help.

21
General Computer Support / Re: MDAC Not Found in Windows 7
« on: March 11, 2013, 12:48:15 pm »
how do i set windows to not restart after blue screen automatically?

22
General Computer Support / Re: MDAC Not Found in Windows 7
« on: March 11, 2013, 12:42:04 pm »
okay how can i take care of that problem?

23
General Computer Support / Re: MDAC Not Found in Windows 7
« on: March 11, 2013, 12:39:21 pm »
i get a blue screen of death with an irq error but i cant read it cuz its really fast

24
General Computer Support / Re: MDAC Not Found in Windows 7
« on: March 11, 2013, 12:36:27 pm »
i have tried doing a repair install but it gets to the end and then fails
so i go back to the same exact thing. i really hate microsoft updates.

25
General Computer Support / Re: MDAC Not Found in Windows 7
« on: March 11, 2013, 12:30:03 pm »
here is what the repair tool said as well:
Log:
Repair MDAC & MS Jet
   Start (3/11/2013 3:23:39 PM)
   Running Repair Under Current User Account
   Running Repair Under System Account
   Done (3/11/2013 3:23:45 PM)

   Total Repair Time: 00:00:06

Pages: [1] 2