Messages

1

General Computer Support / Re: Ethernet Not Recognized Immediately on Boot Up

« on: July 11, 2021, 12:58:29 pm »

Boggin,

Thanks for all of the suggestions.

I tried what you outlines in your last post... unfortunately still no dice...

I have no connection to internet until after 1 minute after startup.

Thanks,
Layne

2

General Computer Support / Re: Ethernet Not Recognized Immediately on Boot Up

« on: July 10, 2021, 06:19:24 pm »

Boggin,

Just tried a different port and restarted... no luck. Still ethernet till a minute later after boot up.

-Layne

3

General Computer Support / Re: Ethernet Not Recognized Immediately on Boot Up

« on: July 10, 2021, 10:46:06 am »

Neither worked. What else can I try?

Thanks for the help btw!!!!

4

General Computer Support / Ethernet Not Recognized Immediately on Boot Up

« on: July 07, 2021, 08:04:07 pm »

Guys,

I have an Ethernet connection on my PC with no wifi card. I am hard wired to the router... My issue is... If I restart my PC then once in the windows login screen... Windows does not recognize Ethernet or internet connection until like 2-3 mins later.... Very delayed...

Is there a way to fix this?

Thanks in advance,
Layne

5

General Computer Support / Re: Keyboard does not work in Bios

« on: September 04, 2016, 10:22:29 am »

I have complained but they want me to send this board in and me be without a computer for several weeks rather than sending me another. Very irritating.

They will replace my board with another but my processor is not compatible.

It is actually the socket pins that I need to straighten.... My processor is fine.

Any suggestions on how to deal with those?

Do you know anyone interested in buying an i7-4930k? It's a silicon lottery jackpot.... I can overclock to 4.5ghz with 1.28 vcore or 4.7 with 1.355 vcore.

6

General Computer Support / Re: Keyboard does not work in Bios

« on: September 04, 2016, 06:49:42 am »

I was able to restore in safe mode. Thank God!

I also figured out the keyboard not working in the bios issue...

I purchased a Inateck 5 port USB 3.0 PCI card (fresco logic f1000) for the oculus rift... When the card is plugged in... My keyboard does not work in the bios... When I unplug the card... My keyboard works in the bios....

So... Now I am troubleshooting that issue.

Also, I received a replacement motherboard  in an RMA for my Asus Rampage IV Black Edition.

When I received it... Some of the cpu socket pins were bent.... One in the middle... And a few in the top left corner.

What is the best way to bend those pins back? I have absolutely no experience with it.

Thanks again guys for all your help. Boggin you always answer my questions.... Thank you.

7

General Computer Support / Re: Keyboard does not work in Bios

« on: September 03, 2016, 05:24:09 pm »

None of my system restore points are working.

I am on default clocks and disabled antivirus and firewall. Still no dice...

Flipping out.

8

General Computer Support / Re: Keyboard does not work in Bios

« on: September 03, 2016, 04:43:45 pm »

Yes sir custom built

9

General Computer Support / Re: Keyboard does not work in Bios

« on: September 03, 2016, 03:46:27 pm »

Guy,

I am having serious issues.

I noticed the chipset driver would not install so uninstalled and deleted driver in order to try to update the latest version to fix my issue.


Well now... I can't install any chipset driver and most of my devices say they are not configured properly in device manager....

Please help.

10

General Computer Support / Re: Keyboard does not work in Bios

« on: August 31, 2016, 07:30:11 pm »

Hello guys,

Thanks for the suggestions but my bios still says no keyboard detected in startup after trying them all.

I am at a loss....

New mobo, new keyboard.... Updated chipset drivers... No dice.

Any other suggestions?

11

General Computer Support / Re: Keyboard does not work in Bios

« on: August 26, 2016, 12:07:00 pm »

Sorry guys. Yes it is a usb keyboard... Corsair k70

I will try your suggestions and report back.

Thank you guys.

12

General Computer Support / Keyboard does not work in Bios

« on: August 25, 2016, 04:00:07 pm »

Hello all,

My keyboard will no longer in the bios... It works once machine is booted into Windows.

Now... Usb on the front work in bios... USB ports attached to case (corsair c70)

My motherboard is asus rampage iv black edition which I am on my second because I rma the last one because of this usb issue.

Please help if you can.

Thanks,
Layne

13

General Computer Support / Re: USB ports on mobo not working in bios

« on: July 02, 2016, 07:24:06 am »

Boggin,

I have already tried both of those. No luck :-(

14

General Computer Support / USB ports on mobo not working in bios

« on: July 01, 2016, 05:44:11 pm »

Hello guys,

You guys always own it when I have an issue. There is no where else I can find info that I have not thought of or those quite smarter than me. =-)

Anyhow, the problem is in the in the subject line...

When I start my PC... No keyboard detected in the bios.... Everything is fine once loaded into Windows.

The USB ports on the front of my PC that were supplied with my case.... They work in the bios.

Any idea?

Thanks in advance for the help,
Layne

15

General Computer Support / Windows 10 Ethernet Issue

« on: April 17, 2016, 03:07:20 pm »

Hello all,

It has been a while but I have singed your praises to everyone I know since I last posted on here and purchased the tweaking.com pro edition.

I am having issue with Windows 10 and my Intel 82579v Gigabit Ethernet connection.

Windows 10 is saying the Ethernet is disconnected. However, if I disable my wifi adapter I have an Internet connection via Ethernet. Also, if I go to status it says ipv4 and IPv6 is disconnected but bytes are coming and out. When I run a speed test on the just the Ethernet I am getting 65mbs dl and 5mbps ul.

This would not bother me other than the fact that Windows applications think the Ethernet is disconnected and I cannot use the Xbox app and sometimes I cannot get Windows updates.

I have updated to the latest driver.

I have searched multiple forums and Google with no solution.

If anyone out there can help please help!

Thanks again,
Layne

16

General Computer Support / 1234F Message On Win7 Boot

« on: October 31, 2015, 09:45:32 pm »

Hello all,

I am getting a 1234F dos message when I try to boot Windows 7.

How can I fix this? I do not want to format because I cannot afford to lose all of the pictures and videos on the drive?

Thanks in advance,
Layne

17

General Computer Support / Re: Windows 10 - Network and Sharing Center Does Not Load

« on: August 08, 2015, 08:18:46 am »

It is going great other than the pure hell I am having with Nvidia drivers and my sli configuration. Sli will not stay enabled and games are freezing like crazy....

18

General Computer Support / Re: Windows 10 - Network and Sharing Center Does Not Load

« on: August 07, 2015, 06:08:46 am »

Good news! I tried the Arconis backup and it worked beautifully.

I upgrade to 10 again...another shot....

19

General Computer Support / Re: Windows 10 - Network and Sharing Center Does Not Load

« on: August 06, 2015, 11:14:40 am »

I did a backup with arconis but I don't trust it.

:-/

Windows.old folder is still there... It will not allow me to revert for some reason

20

General Computer Support / Re: Windows 10 - Network and Sharing Center Does Not Load

« on: August 06, 2015, 09:46:00 am »

Wow I just tried to revert and it is telling me that the files were removed from my PC??!?!?! I have not removed anything...

21

General Computer Support / Re: Windows 10 - Network and Sharing Center Does Not Load

« on: August 06, 2015, 06:52:24 am »

It is basically getting worse and worse.

Now Cortana does not function when I click on the icon on the taskbar...

No sfc /scannow or DISM will work....

I cannot lose my APPS.... how can I repair this or revert back to 8.1 without losing my apps???

There has to be a better way to repair this errors rather than losing ALLL of the apps on ones computer...

Help if you can...

Thanks,
Layne

22

General Computer Support / Re: Periodical PC Freezing

« on: August 05, 2015, 07:25:17 pm »

I ran memtest86 on each stick of ram with no issues or errors.

I am noticing crashes with nvidia drivers (dll files & dx11)

I am on 353.62.... Games crash such as Bioshock infinite, Crysis 3, Dying Light...

Go for about 2-3 mins crash....

A lot of stuff in event viewer... Is there a way for me to share with u guys?

So maybe someone out there could help me fix these horrific issues.... If that is even possible...

Thanks,
Layne

23

General Computer Support / Re: Windows 10 - Network and Sharing Center Does Not Load

« on: August 05, 2015, 06:23:56 pm »

I am having issues with sfc /scannow and dism.

See attached screenshots.

24

General Computer Support / Re: Windows 10 - Network and Sharing Center Does Not Load

« on: August 05, 2015, 07:14:45 am »

Ew! Problems... All of my restore points are gone except one of which still has the problem...

I can't lose all of my info...

I run a pro studio and have tons of plugin configurations that I can't afford to lose...

Gosh any help... There has to be a way.

Thanks,
Layne

25

General Computer Support / Re: Periodical PC Freezing

« on: August 04, 2015, 09:34:41 pm »

Testing 1st stick of ram tonight.  I will post back with results....

Video card seems to be fine.

Thanks again for the help.