Author Topic: SFC Scannow (Read 44450 times)

kdent · « **Reply #75 on:** August 30, 2019, 04:12:53 pm »

Just ran sfc scannow it fail I have save the last two scans here they are mam I don't know about you but this getting to the sucking stage??

kdent · « **Reply #76 on:** August 30, 2019, 06:33:52 pm »

Sorry man this is getting to munch I was putting in my printer lookup and the blue screen!!! so I'am going to try to get it boot up off of my thump drive if not I will go thur windows and reset back new install.Thanks for all of you time Well that did not work at all no boot up went reset in windows it took every thing put windows in got the part where name English click next no keyboard no mouse!,!Sorry can believe this that is all it will do turn it off it reboots up this same page.I guess go get me a new hard drive and put it in??? About ready to take a club to it!!

Boggin · « **Reply #77 on:** August 31, 2019, 12:23:25 am »

I must admit that it looks like your HDD to me but you said the chkdsk didn't show any KBs in bad sectors.

If you are able to, perform a chkdsk /r which will move data from any bad sectors it finds and will block those sectors from being written.

You didn't answer if you had downloaded and installed all of the Windows Updates since reinstalling.

kdent · « **Reply #78 on:** August 31, 2019, 05:24:11 am »

I can’t do any thing it is frozen on the page and no keyboard or mouse??

Boggin · « **Reply #79 on:** August 31, 2019, 07:44:47 am »

Can you power shut it down to perform a cold boot ?

You may need to pull the plug again and then hold the power button in for ~30secs and then see what you have.

How old is the machine ?

kdent · « **Reply #80 on:** August 31, 2019, 08:35:39 am »

Did that no change my unit is 8 years old and there is nothing wrong with it. Thanks for advice but I’am taking it guy to fix it

Boggin · « **Reply #81 on:** August 31, 2019, 08:50:38 am »

That was going to be my next to take in to a reputable repair shop.

I think you have a hardware problem on there which could be your motherboard.

kdent · « **Reply #82 on:** September 02, 2019, 12:10:59 pm »

I. Can’t believe this got my machine back 1st thing I did was go to device manager and there it was big old yellow flag on my serial ATA Contoller.So went to the store and they told me I did need that working to fly FSX??Got home but it first 2 disk went great number3 not so well got error on .It reboot got the blue screen.Got re install again.Any idea where I can get that driver,the program that you suggested I think has a lot of malware because my malbwarebyes,and I have used them before an had a lot of problems.Thanks for any hep.....Scott

Boggin · « **Reply #83 on:** September 02, 2019, 01:45:39 pm »

Just how much did that repair shop check as I don't think that would be why you kept getting sfc /scannow finding corruption after a clean install.

Did you tell them that ?

Is it the SATA Controller driver you need ?

I would contact your computer support for that driver.

Alternatively you could try https://www.driverscape.com/ and while I've never used this site, I did put my make & model of laptop in and while it listed the wrong graphics driver, it did list a SATA Controller driver, but I'd create a system image and the means to recover from it before installing it.

kdent · « **Reply #84 on:** September 02, 2019, 03:45:31 pm »

I just ran and SFC scan it fail I going do this one more time after that I'am done,I try that site and my malware had fith over it it said that I needed 27 need to replace?? Plus they want $30.00 to fix it for you Just got re installed ran sfc scan it pass still missing that driver

Boggin · « **Reply #85 on:** September 03, 2019, 01:35:00 am »

Sorry, I wasn't aware it was a paid for program.

If you can't get that driver from your computer support site then you could try this free driver update program - https://slimware.com/driverupdate/1?utm_source=google&utm_medium=cpc&utm_campaign=DU_SR_ENG_Generic_Revised_SW2xdm866&p2=^SW2^xdm866&tid3=RSA&gclid=EAIaIQobChMIu4bg-5205AIVg7TtCh3sGwEMEAAYASAAEgLOGPD_BwE

I used this years ago but stopped when it said it had found an updated driver for my wireless but was just installing one for the same date I already had.

You don't have to install every updated driver it finds but create restore points before any updates.

kdent · « **Reply #86 on:** September 03, 2019, 06:10:26 am »

sorry guy I took out my malware it only found two drivers they both for my mouse!!Hey I have one I paid money for found 27 drivers to replace so I did and ran a sfc scan it pass but the still have found the one I need!!

Boggin · « **Reply #87 on:** September 03, 2019, 06:43:58 am »

Did it not show which drivers it found before you had to pay ?

Let's see if reinstalling it from the store will resolve.

Go into Device Manager and expand the ATA Controllers and select Update Software - Browse my computer - Let me pick - and check to see which drivers are there.

On my AMD based laptop, I have one for an AMD SATA Controller and one for a standard AHCI controller.

The AMD one is the one that is installed.

I don't know why you are still getting a yellow alert on that but in Device Manager click on View/Show hidden devices to see if you have any other yellow alerts.

kdent · « **Reply #88 on:** September 03, 2019, 09:16:03 am »

Hey guy this gal on Driver update got that son of gun it took about 30 min.but she was real good they even call me on the phone the BEST SERVICE an it cost me $6.58 or some like that just great,thanks again for all of your help.Scott

Boggin · « **Reply #89 on:** September 03, 2019, 09:20:55 am »

Is that the driver update program that your AV kicked out and how did you come to contact them ?

Great news though

kdent · « **Reply #90 on:** September 03, 2019, 09:27:43 am »

Now first took out Malbytes it said no go I think I google it best driver finders but really need to be careful Driver update is the name see you soon

Boggin · « **Reply #91 on:** September 03, 2019, 09:30:23 am »

Is that the first driver update program I'd pointed you to ?

kdent · « **Reply #92 on:** September 03, 2019, 09:56:39 am »

Not for sure, you told me about the microsoft one..

Boggin · « **Reply #93 on:** September 03, 2019, 10:01:05 am »

Can't find it on Google - I'd have to trawl through your thread - no matter.

Anyway, I'm off now and glad that you finally got sorted.

kdent · « **Reply #94 on:** September 03, 2019, 10:39:17 am »

here it is now like I said it does cost $6.00

kdent · « **Reply #95 on:** September 03, 2019, 11:28:15 am »

Well I guess Counted my chickens to fast Loaded FSX in it said re boot it came blue screen saying “stop code:'incaccessible boot device. Any ideas I did run a sfc scan it pass after the driver was in put in.

kdent · « **Reply #96 on:** September 03, 2019, 11:56:47 am »

I don't know if the last post went of not It re booged back to blue screen it goes go diagnosis page then goes to reset or advance what do you want me to do???

kdent · « **Reply #97 on:** September 03, 2019, 12:53:43 pm »

got it boot up!! I think it backup reset desktop is different and that darn driver is again is missing but I watch and what drive she use...

kdent · « **Reply #98 on:** September 03, 2019, 02:36:32 pm »

I got it going again I thinking about going a different way FSX vs FSX Steam I will tell you the driver she used their it is that is the driver she used

Boggin · « **Reply #99 on:** September 04, 2019, 01:43:57 am »

Before you reinstall FSX can you put the machine into a clean boot mode by disabling all items under Start-up in Task Manager then go Start - type msconfig and press enter when it comes up.

Under Services check the box to Hide all Microsoft services - Disable all - Apply - OK then reboot.

This will eliminate any 3rd party program or non MS service as a possible conflict with FSX.