Author Topic: 08 - Repair MDAC/MS Jet fails (Read 30195 times)

phochief · « **on:** December 29, 2017, 10:55:10 pm »

Everytime I run tweaking repair, it gets stuck on 08 - Repair MDAC/MS Jet

There is only low sporadic cpu activity every 15 seconds at this point, and the drive writes a bit sporadically too. I'm running Tweaking Repair in a Safe boot window. Here's what it says the the log window:

08 - Repair MDAC/MS Jet
Start (12/30/2017 1:33:05 AM)
Running Repair Under Current User Account
Running Repair Under System Account

The current repair has failed to start for over 30 sec.
Trying Again....

Running Repair Under System Account

The current repair has failed to start for over 30 sec.
Trying Again....

Running Repair Under System Account

The current repair has failed to start for over 30 sec.
Trying Again....

Running Repair Under System Account
Done (12/30/2017 1:44:03 AM)

Done, but failed, at (12/30/2017 1:44:03 AM)
Total Repair Time: 00:15:55

The current repair has failed to start 4 times.
Something is keeping the repair from running.

Try running the repairs in Windows Safe Mode. (This will keep 3rd party programs from getting in the way of the repairs)
If the repairs still fail then please post in the Tweaking.com forums for support.

Thanks for any insight or bug fix.
David

Boggin · « **Reply #1 on:** December 30, 2017, 02:16:16 am »

If you use Office, go into Programs and Features by going Start - type appwiz.cpl and press enter.

Right click on Office and select Repair, but if it isn't Office related then I'll pass this on to see what else can be causing it.

machinehead · « **Reply #2 on:** January 01, 2018, 03:12:21 pm »

Perhaps I should start a new thread but I have exactly the opposite issue.
08 has been running for two hours now.
How long should I let it run?
What's the best way to exit it if I give up on it?

machinehead · « **Reply #3 on:** January 01, 2018, 03:20:44 pm »

I realized a bit more info might be useful.
The program does do a brief CPU usage and Drive Write every 7 seconds.
And, if it matters, I do have a database with a lot of entries.

Boggin · « **Reply #4 on:** January 02, 2018, 12:13:30 am »

Quote from: machinehead on January 01, 2018, 03:20:44 pm

I realized a bit more info might be useful.
The program does do a brief CPU usage and Drive Write every 7 seconds.
And, if it matters, I do have a database with a lot of entries.

Yes, you should open your own thread as the reasons could be different.

It may well be because of the size of your database but as long as the CPU is still working, Shane has said before that the program is working.

I can't tell you when to give up on it because that may be normal for your machine.

albesp77 · « **Reply #5 on:** January 11, 2018, 12:39:51 am »

dear all, i've found this repair software on internet, searching a solution to fix problem with mdac, with test_mdac tool i see the classic error 91 with ADO, so i try to use this software, latest version 4.0.12, using repair "08 - Repair MDAC/MS Jet fails", i try in windows normal mode and in safe mode, but the problem persist, is cannot solved it with this tool, i'm using windows 7 x64 italian updated with all windows updates! can anyone help me ? i really need ado on this computer and i cannot format it! thanks!

Boggin · « **Reply #6 on:** January 11, 2018, 12:43:09 am »

As there have been a couple of complaints about this repair, I'll pass it on.

EDIT - Try the earlier versions to see if the repair will run, which you can find links for lower down on the right at https://filehippo.com/download_tweaking-com-windows-repair/

Boggin · « **Reply #7 on:** January 11, 2018, 01:02:47 pm »

I've had a reply back that this is being looked into.

albesp77 · « **Reply #8 on:** January 12, 2018, 12:15:35 am »

i cannot download all old builds, can you tell me a particular build to test ?

Boggin · « **Reply #9 on:** January 12, 2018, 12:34:25 am »

I didn't experience any problems with 4.0.10 or 4.0.11 or as far as that repair with 4.0.12, but I'd start with 4.0.10.

albesp77 · « **Reply #10 on:** January 12, 2018, 12:37:29 am »

ok i'll try on next week and report here!

Boggin · « **Reply #11 on:** January 12, 2018, 12:38:53 am »

Okay.

albesp77 · « **Reply #12 on:** January 16, 2018, 12:18:43 am »

tested v4.0.10, the problem persist, no solution!
now i want to ask:

1) is possible to have a log of repair to see if something is failed and send to you ?
2) i can try old v3.x software repairs ?

tell me!

Boggin · « **Reply #13 on:** January 16, 2018, 12:52:11 am »

There's no reason why you can't try an earlier version but that website only has 3.9.4 as its earliest version.

I could expect this problem to occur on Win 10 given its transformation and it may have been the way the program has been developed to accommodate the changes made for Win 10.

I'll create a system image of my Win 7 machine and run 4.0.12 to see if I get the same problem and report back.

albesp77 · « **Reply #14 on:** January 16, 2018, 12:53:57 am »

ok, i'll remember to you that i have windows 7 x64 build updated (italian)

Boggin · « **Reply #15 on:** January 16, 2018, 01:00:39 am »

I don't think the language makes a difference as you aren't the first to report 08 not executing.

Boggin · « **Reply #16 on:** January 16, 2018, 02:22:19 am »

Update - While the repairs are still running, they sailed through 08 so I am unable to replicate the hang on this repair.

Did you perform a chkdsk /r and sfc /scannow before proceeding with the repairs in Safe Mode with Networking ?

albesp77 · « **Reply #17 on:** January 16, 2018, 02:48:40 am »

i do not have any hang in this repair, repair complete their process but the problem with ADO using Test_MDAC.exe is unsolved by me! i try also chkdsk and sfc, i try also in safe mode, i try all possibilities but i really does not know why error is not solved!

Boggin · « **Reply #18 on:** January 16, 2018, 02:58:03 am »

So what problems is it causing ?

albesp77 · « **Reply #19 on:** January 16, 2018, 03:02:14 am »

repair does not repair MDAC, but complete with no errors! i've still problem with MDAC on my computer before and after repair!

Boggin · « **Reply #20 on:** January 16, 2018, 03:31:31 am »

Are you using an OEM or purpose built machine ?

It may be possible to perform a repair install but you will need to have a valid product key such as the one on the COA sticker if it's still legible.

If using an OEM machine and you have the COA sticker key, you can change the product key to that by going Start - type Slui 3 and press enter then enter that key.

If you don't have a Win 7 install disk that includes SP1 then you can download the ISO and use Windows USB/DVD Burner Tool.

http://windowsiso.net/

I think these ISOs include SP1 - hover over Win 7 ISO then Download and select your version and select Save.

http://wudt.codeplex.com/ - this is for the burner tool.

albesp77 · « **Reply #21 on:** January 16, 2018, 03:36:23 am »

i need to found time for this, but my question is why this tool cannot repair my problem ? is not designed for this ?

Boggin · « **Reply #22 on:** January 16, 2018, 03:40:22 am »

I'll ask why it hasn't repaired MDAC but need more info to pass on.

Do you have anything in Event Viewer recorded for this or the error message you can post ?

Have you tried 3.9.4 ?

albesp77 · « **Reply #23 on:** January 16, 2018, 03:58:44 am »

nothing in event logger, i'll try v3.9.4 in next days!

Boggin · « **Reply #24 on:** January 16, 2018, 04:00:55 am »

What are you doing when you get the error 91 ?