Author Topic: [[SOLVED]] How to fix Windows 7 sleep mode issues,problems (Read 25920 times)

makinero · « **on:** May 17, 2016, 11:28:56 am »

How to disable the Sleep Mode?

Kernel-Power
The system goes into sleep mode.

Cause: Inaction system

My power plan:
Turn off the screen: Never
Put the computer to sleep: Never

Power Saver and Wake on LAN options (Intel)
Power Saver Options: ???

Code: [Select]

Sets the adapter to respond to ARP requests without waking the system from sleep or hibernate. The system can remain in sleep or hibernate mode and still maintain its network presence.

Code: [Select]

Sets the adapter to respond to NS requests (NS requests are the IPv6 equivalent of ARP requests) without waking the system from sleep or hibernate. The system can remain in sleep or hibernate mode and still maintain its network presence.

Code: [Select]

Enables Energy Efficient Ethernet (EEE). EEE allows this device to transmit and receive packets with minimal bursts of energy and enter a low power state when idle. 


 NOTE: Both ends of the link must have EEE enabled for this setting to be effective.

Code: [Select]

Sets the adapter to negotiate the lowest possible speed setting to save power while the computer is in standby mode. 


 NOTES:

Wake on Magic Packet or Wake on Directed Packet must be enabled for this option to function. 
Wake on Magic Packet from power off state has no effect on this option. 
 

To support this feature, the adapter must be:

configured to automatically detect or negotiate speed. 
connected to a link partner that can automatically negotiate speed.

Code: [Select]

Enables the Intel® System Idle Power Saver feature. Sets the adapter to negotiate the lowest possible speed setting when the system and network is idle.

To support this feature, the adapter must be:

configured to automatically detect or negotiate speed. 
connected to a link partner that can automatically negotiate speed.

Wake on LAN: ???

Code: [Select]

Enables this device to bring the computer out of standby or hibernation when it detects a packet with a specific pattern. The specific patterns are determined by the operating system.

Code: [Select]

Allows the adapter to wake an Advanced Power Management (APM) enabled system from a power-off (S5) state. ACPI systems can wake from an S5 state if the system's BIOS supports it.

Code: [Select]

Allows the adapter to wake an Advanced Power Management (APM) enabled system when the network connection establishes link.

ACPI (Advanced Configuration and Power Interface) systems can wake from Standby (S3) or Hibernate (S4). If the system's BIOS supports it, ACPI systems can wake from a Power-off (S5) state.


 NOTES:

To wake from S5, you must enable the Wake on Magic Packet from power off state setting. 
Link must be lost before the system enters an S5 state in order to wake the system with a link up event. 
On Microsoft* Windows* 7, or later, you must enable Wake on Magic Packet or Wake on Pattern Match for Wake on Link to function properly.

Too many advanced options. I do not understand!

Jethro Bodine · « **Reply #1 on:** May 17, 2016, 09:14:49 pm »

Easy
Download " Don't Sleep " from here -
http://www.softwareok.com/?seite=Microsoft/DontSleep

makinero · « **Reply #2 on:** May 17, 2016, 11:47:49 pm »

Quote from: Jethro Bodine on May 17, 2016, 09:14:49 pm

Easy
Download " Don't Sleep " from here -
http://www.softwareok.com/?seite=Microsoft/DontSleep

This program is Not prevent my PC from going into sleep mode.
Identical to the standard action plan in Windows!
Did not work!

Power Management -> Power Saver and Wake on LAN options issue(Intel)
Note:Not Realtek

Jethro Bodine · « **Reply #3 on:** May 18, 2016, 07:58:41 am »

"This program is Not prevent my PC from going into sleep mode."

It does PRECISELY that .

Choose the configurations ( options ) that you need and it will do exactly what you want ....
..... or what you SAY you want .

If it does not work for you , the problem is NOT with the program .

Once again , a little gratitude for help received would go a long way !!

makinero · « **Reply #4 on:** May 18, 2016, 08:51:40 am »

It's a shitty program, it is not the solution to my problem.

need to set properly Power Management "Power Saver", "Wake On LAN" etc. (read post#1)

Julian · « **Reply #5 on:** May 18, 2016, 11:38:43 pm »

okay here. is some commands for powercfg...

powercfg.exe -change -monitor-timeout-ac 0
powercfg.exe -change -monitor-timeout-dc 0
powercfg.exe -change -disk-timeout-ac 0
powercfg.exe -change -disk-timeout-dc 0
powercfg.exe -change -standby-timeout-ac 0
powercfg.exe -change -standby-timeout-dc 0
powercfg.exe -change -hibernate-timeout-ac 0
powercfg.exe -change -hibernate-timeout-dc 0

makinero · « **Reply #6 on:** May 19, 2016, 02:28:58 am »

Quote from: Julian on May 18, 2016, 11:38:43 pm

okay here. is some commands for powercfg...

powercfg.exe -change -monitor-timeout-ac 0
powercfg.exe -change -monitor-timeout-dc 0
powercfg.exe -change -disk-timeout-ac 0
powercfg.exe -change -disk-timeout-dc 0
powercfg.exe -change -standby-timeout-ac 0
powercfg.exe -change -standby-timeout-dc 0
powercfg.exe -change -hibernate-timeout-ac 0
powercfg.exe -change -hibernate-timeout-dc 0

Not work for me!
-----------------------------------------------------------------------------------------------------------------------
The following sleep states are available on this system: Suspend (S3)
ACPI (Advanced Configuration and Power Interface) systems can wake from Standby (S3)
-----------------------------------------------------------------------------------------------------------------------

Julian · « **Reply #7 on:** May 19, 2016, 09:47:00 am »

Well unfortunately it seems nothing anyone can offer you may help you. at least i can say i tried.

makinero · « **Reply #8 on:** May 19, 2016, 11:57:41 pm »

Julian - thanks for trying to help , in the meantime, I found the solution:

In Local Group Policy Editor (gpedit.msc):

Computer Configuration » Administrative Templates » System » Power Management » Sleep Settings:

Allow Standby States (S1-S3) When Sleeping (Plugged In) --> Not configured change to Disabled

makinero · « **Reply #9 on:** May 20, 2016, 06:44:28 pm »

It did not work!

Code: [Select]

: Kontroler osadzony zwrócił dane mimo braku żądania danych. Być może system BIOS próbuje uzyskać dostęp do kontrolera osadzonego bez synchronizacji z systemem operacyjnym. Te dane zostaną zignorowane. Nie są wymagane żadne dodatkowe czynności, jednak należy skontaktować się z producentem komputera w sprawie uaktualnionego systemu BIOS.

Julian · « **Reply #10 on:** May 22, 2016, 02:28:18 pm »

Can you go into your bios and disable the sleep modes?

makinero · « **Reply #11 on:** May 23, 2016, 02:03:32 am »

Code: [Select]

powercfg.exe -change -monitor-timeout-ac 0
powercfg.exe -change -monitor-timeout-dc 0
powercfg.exe -change -disk-timeout-ac 0
powercfg.exe -change -disk-timeout-dc 0
powercfg.exe -change -standby-timeout-ac 0
powercfg.exe -change -standby-timeout-dc 0
powercfg.exe -change -hibernate-timeout-ac 0
powercfg.exe -change -hibernate-timeout-dc 0

Bad solutiuon. How to restore "Standby" (Manuallly)

Quote from: Julian on May 22, 2016, 02:28:18 pm

Can you go into your bios and disable the sleep modes?

Bad solution!

Best working solution:
Power Management

Power Saver + Wake On LAN!

Read again post #1

What options turn on and turn off what?

Code: [Select]

Power Saver
[ ]
[ ]
[ ]
[ ]
[ ]
Disable or Enable ?
----------------
Wake ON LAN
[ ]
[ ]
[ ]
Disable or Enable?
----------------------

[ ] OFF / DISABLE
[X] ON / ENABLE

Julian · « **Reply #12 on:** May 23, 2016, 11:07:27 pm »

powercfg -change -standby-timeout-ac 15
powercfg -change -standby-timeout-dc 15
That will set it for 15 min Lol

makinero · « **Reply #13 on:** May 24, 2016, 03:47:46 am »

It does not work
now turn off the hard disk every few minutes.
I once again that the Power Options settings have set:

Code: [Select]

Turn off drives: Never! So what is this shit change the settings?
How completely off INTEL POWER MANAGEMENT?

Event Log:
Do usługi Usługa Czas systemu Windows został pomyślnie wysłany sygnał sterujący zatrzymaj.

Określona przyczyna: 0x40030011 [System operacyjny: Łączność sieciowa (Planowane)]

Code: [Select]

error messages:

	
The TCP/IP NetBIOS Helper service was successfully sent a stop control.
  
The reason specified was: 0x40030011 [Operating System: Network Connectivity (Planned)]
  
Comment: None

makinero · « **Reply #14 on:** May 24, 2016, 07:12:49 am »

Julian

I found the application setting "Power Plan" ASUS
I turned off!

The Best Solution:

Julian · « **Reply #15 on:** May 24, 2016, 11:35:24 am »

Huh weird I know this topic is solved but if you want ever bit of juice with power have you ever heard of CPU parking?

makinero · « **Reply #16 on:** May 24, 2016, 12:06:31 pm »

I do not know what you mean, but in my shows:

CPU Frequency

Code: [Select]

3700 MHz  -  43000 MHz     [x 4]
CPU Power: 55 W
Temp. 53oC
CPU Fan Extreme Quiet 200 - 700 RPM
Energy Saving 14 - 15 W
Configured Max CPU Power - Disabled

Julian · « **Reply #17 on:** May 24, 2016, 12:09:45 pm »

look at this picture in resource monitor.

makinero · « **Reply #18 on:** May 24, 2016, 12:19:30 pm »

http://netserver.cloudapp.net/files/CoreParkingManager.zip

makinero · « **Reply #19 on:** May 25, 2016, 02:23:32 am »

Julian - I do not use the parking CPU Cores.

It uses better technology.
Configured Max CPU Power

Code: [Select]

Enabling the Configured Max CPU Power may decrease the total power to the CPU, and affect the CPU performance under a heavy system load.

Ps. Prev post edit:

Quote

now turn on the hard disk every few minutes.

Solution:

Author Topic: [[SOLVED]] How to fix Windows 7 sleep mode issues,problems (Read 25920 times)

makinero

makinero

makinero

makinero

makinero

makinero

makinero

makinero

makinero

makinero

makinero

makinero